Resetting All Values (Reset) - Balluff BTL7-A510-M Serie Betriebsanleitung

BTL7-A/G510-M _ _ _ _ -H/W(8)-SA378-S32/S115/_ _ _
Micropulse Transducer - Rod Style
9

Resetting all values (reset)

NOTICE!
Interference in function
Resetting the values while the system is running may
result in malfunctions.
► Stop the system before performing the reset.
The reset function can be used to restore all the settings
to the factory settings. For a reset the magnet may also be
located outside the measuring range.
Activate reset
► Simultaneously activate a
Reset
► Simultaneously activate a
After activation:
⇒ All values are reset.
⇒ Current position value is displayed.
⇒ Reset is deactivated.
Abort reset
Resetting can be aborted without any changes
being saved after the Activate reset step.
► Briefly activate
a and b
⇒ Current position value is displayed.
www.balluff.com
and b for at least 4 s.
and for at least 4 s.
b
simultaneously (< 1 s).
a
b
> 4 s
a
b
> 4 s
a
b
< 1 s
Displayed values
(example)
At 0 to 10 V
5.39 V
10.50 V
0.00 V
9.89 V
english 19