Adjusting The Rear Brake Pedal - Ducati MONSTER S4R 2003 Anleitung- Und Instandhaltungsheft

Adjusting the rear brake pedal position (fig. 18)
In order to suit any rider preferred riding position, it is
possible to change the rear brake lever position with
respect to the footpegs.
To set the rear brake pedal,
loosen check nut (5).
Turn pedal travel adjusting screw (6) until pedal is in the
desired position.
Tighten check nut (5).
Work pedal by hand to make sure it has 1.5 - 2 mm free
E
play before brake begins to bite.
If not so, set the length of cylinder linkage as follows.
Loosen the check nut (7) on cylinder linkage.
Tighten linkage (8) into fork (9) to increase play, or
unscrew linkage to reduce it.
Tighten check nut (7) and check pedal free play again.
24
9 7 8
6
5
fig. 18