Ducati SUPERBIKE 999R 2006 Anleitung- Und Instandhaltungsheft Seite 110

Lap time recording
This function lets you record the lap time and indicates
the highest speed and engine rpm reached in that lap.
Select the LAP display (4, fig. 10). While the vehicle is
moving, press button (5, fig. 11) to start the on-board
chronometer. If button (5) is pressed again, the
chronometer stops and at the same time starts the
on-board chronometer for a 2nd count.
You can store up to 19 laps; if more laps are stored after
this, the first laps are erased (it stores only the last 19 laps).
Notes
In LAP mode, the electric starter button (5) is
disabled.
Viewing stored lap times
After lap time recording is stopped, 19 stored lap times
can be viewed on the LCD. After switching off the vehicle,
press button (2, fig.10) and turn the key switch from OFF
to ON to select the function.
When the function is selected, press button (1) to view the
recorded times one after the other; the instrument panel
shows the following information:
- lap number (6) to which the information relates;
- highest engine speed (7, fig. 10) recorded on the
selected lap;
- recorded time to complete the selected lap (4, fig. 10);
- highest road speed (8, fig. 10) recorded on the selected
lap.
1
8
4
7
2
6
fig. 10
5
fig. 11
17
E