Gastrodomus MK225 Handbuch Zur Installation, Bedienung Und Wartung Seite 22

FUNCTIONING DESCRIPTION
The control devices are designed and manufactured so as much sure and reliable and resistant to the service normal
stresses, to the foreseeable strains and to the external agents. Besides they are clearly visible, locatable and marked from
a suitable marking. Here follow the main control devices are showed:
TYPE / COLOR
Button / black
Key / black
Key / black
Key / black
Key / black
Display / red
STARTING
The machine starting with impulse is possible only with a voluntary action on the control device foreseen for this
aim:
machine MK225/225VF :
machines MK330/340/350 – MK430/440/450 : press
STOP
For the stop control push the button "
FUNCTIONING SAFETY
If the machine is under stress, or is submitted to too long functioning times or submitted at overloaded, the same stops
immediately for the thermal protection functioning. In this case wait that it is completely cooled before proceeding to
the starting function.
VOLTAGE LACKING
In case of electric feeding breaking or if the machine is disconnected from the electric net, this last one will be able to be
restarted only following the starting function, after the electric feeding back or the reconnection to the electric net.
CONTROLS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CONTROL
Check that:
- there aren't inside the pot extraneous
objects
Check the cleaning:
- of the machine external sides
- of the tool along its surface
- of the tool external sides
Check the integrity:
- of the fixed protections
- of the machine body
Check the functionality:
- of the control system parts / control
about the safety;
- of the control devices.
Check the absence:
- of strange noises after the starting
For any intervention type or for the parts change that are damaged, activate the maintenance service. The possible
change must happen with manufacturer original products or at least of quality, safety and equivalent characteristics. For
analysis contact the Authorized Assistance Center.
22
" " / Button for the machine starting control with maintained action
" " / Max speed switching button only for blender tool
" " / Key for speed increase
" " / Key for speed reduction
" " / Key for the machine starting safety
Speed visualization: from 1 to 9 / maximum speed visualization
only use with maintained action
"
Sight control of the indicated parts, to check of objects or extraneous
bodies lacking as for example different tools, clothes, etc ... and that there
isn't however the food product
All indicated parts surfaces, before the machine use must be checked
visually to verify their cleaning. In case of molds presence or other type of
dirtiness, provide with the cleaning procedure in accordance with the
chapter 5 indications.
All fixed protections, etc.. must perform the function for which have been
foreseen. Indicated parts sight check to verify their integrity in their
surface external part. The parts must be however changed at the first
erosion signals or breaking (cfr. Authorized Assistance Center).
All devices must perform the function for which have been foreseen.
Control directly the devices so that these ones determine the waiting
function. The actuators and all parts must be however changed to the first
erosion signals or breaking (cfr. Authorized Assistance Center).
During the functionality checking of the control devices, if there are
strange noises, due for example to a seizing or mechanical breaks, stop
immediately the machine and activate the maintenance service.
REFERENCE / DESCRIPTION
+ " ". Afterwards release button.
MODALITIES AND CHECKS
ORIGINAL INSTRUCTIONS TRANSLATION