Gastrodomus MK225 Handbuch Zur Installation, Bedienung Und Wartung Seite 20

INTRODUCTION
The lacked standards and safety procedures applications can be danger and damage sources.
The machine means bound in the use for the respect, on behalf of the final user, of:
1. all rules, of insertion in the environment and of people behavior, fixed from the laws and/or applicable
standards; with particular reference to the fixed plant upstream of the supplied machine and for its
connection / functioning;
2. All further instructions and use warnings making part of the technical / graphic documentation annexed to the same
machine.
Except where differently specified, the personnel which performs the installation interventions,
connection, maintenance, reassembly, and reuse, damages or breakdowns, demolition and
dismantling must be a skilled personnel qualified in safety matter and educated on the residual risks, with
the competencies, in safety matter, of the maintenance employees.
ENVIRONMENTS, WORKING AND PASSING PLACES
The work environment must answer to the directive 89/654/CEE requirements. In the working area foreign object must
not be present. The employer, in the directive 89/391/CEE respect, concerning the measures realization turned to
promote the safety and workers health improvement during the work, must provide to eliminate or reduce the showed
residual risks as foreseen in the present manual.
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK
BROKEN/WORN PARTS
For any occasion the operator must not try to open or remove a fixed protection or tamper a safety
device.
In the phase of equipment, maintenance, tools change and cleaning, and during all further manual
operations that happens introducing the hands or other body parts in the machine dangerous areas, a
residual risk remains due above all to:
1. knocks with machine manufacturing parts,
2. grazing and/or abrasion with machine rough parts,
3. sharp pain with the sharpened parts,
4. cut with tools sharpened parts.
Besides in the cleaning phase or unblock of the inserted pieces in the blades that happens also introducing the hands
near the cutting tools, a residual risk remains due above all to a cut with tools sharpened parts.
Besides, the operator and the maintenance man must be skilled for the intervention connected to the manual
operations with open protections, must be trained on the joined consequent risks and must be authorized from a
responsible person and must use adequate individual protection devices, five fingers anti cutting gloves. All
interventions on the discs must happen keeping them with the blades towards the bottom side.
La The machine management is allowed only to the authorized personnel and opportunely educated and
endowed of a sufficient technical experience.
Before to switch on the machine perform the following operations:
- read with attention the technical documentation,
- Know what protections and emergency devices are available on the machine, their location and functioning.
The not authorized use of commercial parts and accessories making part of the protections and safety devices can cause
some malfunctions and the ranger situation beginning for the operators. The operator must besides have received an
adequate training.
20
CHAP. 3. SAFETY INSTRUCTIONS
DUE TO THE FIXED
CHAP. 4. PUT ON SERVICE AND USE
PROTECTIONS REMOVAL,
ORIGINAL INSTRUCTIONS TRANSLATION
INTERVENTIONS ON