Yamaha WR426F Handbuch Seite 312

FRONT FORK OIL SEAL AND DUST SEAL CLEANING
FRONT FORK INSPECTION/
Tighten the axle nut while pushing down
G
the drive chain.
Tighten the locknuts.
G
EC36C000
FRONT FORK INSPECTION
1. Inspect:
G
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
G
G
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
G
G
NOTE:
Clean the dust seal and oil seal after every
G
run.
Apply the lithium soap base grease on the
G
inner tube.
3 - 36
Axle nut:
125 Nm (12.5 m • kg, 90 ft • lb)
Front fork smooth action
Operate the front brake and stroke the
front fork.
Unsmooth action/oil leakage → Repair
or replace.
Protector
Dust seal 1
Dust seal a
Oil seal b
INSP
ADJ