SWM VAREZ 125 Kurzanleitung Seite 50

ERROR CODE ERROR CODE
DASHBOARD OBD
E-17 P0132 O2 sensor: high voltage.
E-18 P0133 O2 sensor: too long waiting time.
E-19 P0134 O2 sensor: no activity detected.
E-20 P0135 O2 sensor heating circuit malfunction.
E-24 P0231 Fuel pump secondary circuit low input.
E-25 P0232 Fuel pump secondary circuit high input.
E-26 P0233 Fuel pump secondary circuit intermittent input.
E-27 P0261 Injector low input.
E-28 P0262 Injector high input.
E-36 P0351 Ignition coil primary or secondary circuit malfunction.
ERROR DESCRIPTION ACTION
Check O2 sensor connector.
If the connector is correctly plugged, ask for assistance.
Check O2 sensor connector.
If the connector is correctly plugged, ask for assistance.
Check O2 sensor connector.
If the connector is correctly plugged, ask for assistance.
Check O2 sensor connector.
If the connector is correctly plugged, change the sensor. After
changing the O2 sensor, if the error persists ask for assistance.
Check the fuel pump connector.
If the connector is correctly plugged, ask for assistance.
Check the fuel pump connector.
If the connector is correctly plugged, ask for assistance.
Check the fuel pump connector.
If the connector is correctly plugged, ask for assistance.
Check injector connector.
If the connector is correctly plugged, ask for assistance.
Check injector connector.
If the connector is correctly plugged, ask for assistance.
Check the ignition coil connector.
If the connector is correctly plugged, ask for assistance.
17
EN -