Table Mount Bracket Plates; Screw The Suction Hose Adapter; Assemble Rip Fence - Holzmann TS 200 Originalbetriebsanleitung

13.3.10 Table mount bracket plates

 Loosen the screws on the table kicker plate so far that they can be moved left and right in the
groove of the aluminum profile.
CAUTION:
 After insertion of the first plate, the suction hose bracket can be mounted. -see 6.2.11 -
 Otherwise, follow up on the 2nd plate and tighten all screws.

13.3.11 Screw the suction hose adapter

 The suction hose adapter here, or inserted elsewhere in
the groove of the aluminum profile.

13.3.12 Assemble rip fence

Screw the adapter as shown on the aluminum profile and slide it
into the rip fence guide profile.
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Tischkreissäge / table saw TS 200 / TS 250
ASSEMBLY
Seite 41