Trip Settings; Error Messages - SWM SM 125 R 2020 Kurzanleitung

OUTLAW 125

TRIP SETTINGS

Press the "Set" key (1) until "TRIP" appears and
then press the button (1) for more than 3
seconds to reset the value and return the count
to 0 km or miles.
1
UNIT OF MEASURE SETTINGS
The unit of measure must be set with the
motorcycle stopped and key in the ON position.
Press the "Set" key (1) until "ODO" appears and
then press the button (1) for more than 3
seconds to switch from km to miles or vice versa.
1
16 / EN

ERROR MESSAGES

In the event of a fault, the relevant error code is
displayed on the display (1); see the closes SWM
dealer to check the fault.
Operate as shown for the following error codes.
1