Power Cable Connection - Pioneer dvh p 5000 mp Installationsanleitung

Connecting the Units

Power cable connection

Multi-CD player
(sold separately)
Note
Depending on the kind of vehicle, the function of 3*
and 5* may be different. In this case, be sure to
connect 2* to 5* and 4* to 3*.
3*
5*
C a p ( 1 * )
When not using this terminal,
do not remove the cap.
ISO connector
Note
In some vehicles, the ISO connector may
be divided into two. In this case, be sure
to connect to both connectors.
4 En
IP-BUS cable
1*
2*
4*
Yellow (3*) Yellow (2*)
Back-up To terminal always supplied
(or accessory) with power regardless of
ignition switch position.
Red (5*) Red (4*)
Accessory To electric terminal controlled
(or back-up) by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Refer to pages 6 – 11.
This product
Rear audio output
(Refer to pages 8 – 11.)
Antenna jack
Connect leads of the
same color to each other.
Fuse holder
Optical input
IP-BUS input (Blue)
Fuse resistor
Fuse resistor