Connecting To The Network Through Lan Interface; Connecting To A Wireless Lan; Ac Power Connection - Pioneer X-HM70-S Bedienungsanleitung

Connecting your equipment
Connecting to the network through LAN
interface
By connecting this receiver to the network via the LAN
terminal, you can listen to Internet radio stations. To listen to
Internet radio stations, you must sign a contract with an ISP
(Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored
on the components on the network, including your computer,
using NETWORK functions.
SPEAKERS
ANTENNA
AM
LOOP
FM
UNBAL
75 Ω
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX)
LAN (10/100)
Router
to LAN port
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your
router does not have the built-in DHCP server function, it is
necessary to set up the network manually. For details, see
Network setup menu on page 21.
10
En
Note
• Refer to the operation manual of the equipment you have
as the connected equipment and connection method
may differ depending on your Internet environment.
• When using a broadband Internet connection, a contract
with an Internet service provider is required. For more
details, contact your nearest Internet service provider.

Connecting to a wireless LAN

Wireless connection to the network is possible through a
wireless LAN connection. Use the separately sold AS-WL300 ANTENNA
AM
for connection.
LOOP
FM
UNBAL
75 Ω
Internet
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V
RT
Modem
LAN
3 2 1 WAN
LAN cable
(sold separately)
Wireless LAN converter (AS-WL300)
For details, refer to the operating instructions of the wireless
LAN converter (AS-WL300).
SPEAKERS
Internet
0.6 A MAX)
LAN (10/100)
Modem
WAN
Router
DC 5V Ethernet WPS

AC power connection

After checking all the connections have been made correctly,
plug the AC power lead of this unit into the wall socket.
CAUTION
• Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
• Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The
power cords should be routed such that they are not likely
to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord
once in a while. When you find it damaged, ask your
nearest PIONEER authorized service center or your dealer
for a replacement.