Connecting The Units; Power Cable Connection - Pioneer DEH-P65BT Installationsanleitung

Connecting the Units

Power cable connection

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
3*
5*
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
3
1*
2*
4*
Cap (1*)
Do not remove cap if
this terminal is not in
use.
Yellow (3*)
Back-up (or
accessory)
Red (5*)
Accessory
(or back-up)
Black (chassis ground)
Connect to a clean, paint-free metal location.
Notes:
• Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
• When using a subwoofer of 70 W (2 Ω) , be sure to
connect with Violet and Violet/black leads of this unit. Do
not connect anything with Green and Green/black leads.
Connect leads of the same
color to each other.
Yellow (2*)
Connect to the constant
12 V supply terminal.
Red (4*)
Connect to terminal controlled
by ignition switch (12 V DC).