SWM SM 125 R 2020 Kurzanleitung Seite 49

5
4
Self-inspection
① If only connected with BAT, the dashboard displays item name for 2s, and
displays version number for 2s, then LCD self-inspection starts.
② If only connected with IGN (or connected with ING after BAT), LCD self-
inspection starts.
③ If BAT and ING are connected at the same time, it's the same as ②.
Buttons control
1) Accumulated/single mileage switch: Short press left button to switch
between accumulated and single mileage.
2
3
1
2) Metric/British system switch: Press and hold the left button in ODO display
interface.
3) Color switch: Press the right button in non clock setting interface to switch
color (between orange and blue). The default color is blue.
4) Clock setting: Press and hold the right button in non clock state to enter
the clock setting interface; Short press the right button in clock setting
interface, the corresponding clock bit +1; Press and hold the right button in
the clock interface to exit "hour/minute/clock" respectively.
5) Subtotal resetting: Press and hold the left button in trip display interface.
SM125
15 / EN