Bosch Rexroth SB356 Bedienungsanleitung Seite 36

36/124
Equipping the system boxes
A tightening channel consists of the following
components:
• Stationary tightening spindle or ErgoSpin
hand-held nutrunner with connection cable
• Controller
• Servo amplifier
If the appropriate control and servo
components are installed, both stationary
tightening spindles and ErgoSpin hand-held
nutrunners can be connected to and
operated on the SB356 system box. Mixed
operation of stationary tightening spindles
and ErgoSpin hand-held nutrunners on an
SB356 is possible at any time.
The maximum permissible peak current for up
to six tightening channels in the system box is
140 ampere. This is why you may only install
components with a power consumption that
does not exceed a total of 140 ampere.
Total power consumption (tightening
spindles + ErgoSpin) ≤ 140 A
Table 5 shows an overview of the power
consumption of tightening spindles and
ErgoSpin hand-held nutrunners.
Bosch Rexroth AGSB356 | 3 609 929 B67/2008-11
Table 5:Tightening channel power consumption
Servo ampli-
fier
LT355
LT354
LT353
Servo ampli-
fier
LTU350/1
Tightening Power con-
spindle sumption
Size 5 45 A
Size 4 28 A
Size 3 14 A
Size 2 7 A
ErgoSpin Power con-
hand-held sumption
nutrunner
ESA220S
ESA150S
ESA100S 50 A
ESV146
ESV073
ESA075...
ESA065...
ESA056...
ESA040...
33 A
ESV050
ESV025
ESM025
ESM035
ESA030... 18 A
ESA013...
ESA005...
ESV012 11 A
ESV005
ESM012...