Error Codes - Pkm IF 2 Bedienungsanleitung

C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
1. Cookware cannot be
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
1. Technical malfunction.
If the appliance has a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the customer service.

7.1 Error codes

C
ODE
F3/F4
F9/FA
E1/E2
E3
E5
*: IGBT = insulated-gate bipolar transistor, a semiconductor device to control the
load power supply.
Depending on model.
6
Depending on model.
7
DISPLAYED
detected,
positioned on
6 (
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
P
OSSIBLE CAUSES
➢ Temperature sensor of
the induction coil is
defective.
➢ Temperature sensor of
the IGBT*.
➢ Abnormal
voltage.
➢ High temperature of the
induction coil sensor.
➢ High temperature of the
IGBT sensor.
.
1. Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
1. Note the complete error-code
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at.
➢ Contact the customer service.
➢ Contact the customer service.
➢ Please inspect whether the
supply
voltage is normal. Power on
after the power supply is
normal.
➢ Contact the customer service.
➢ Please
appliance has cooled down.
61
).
M
EASURES
restart after
7 ,
the