How To Stop Cooking; Key Lock - Pkm IF 2 Bedienungsanleitung

T
HE DISPLAY INDICATES
➢ You have not placed the cookware on the correct zone, or
➢ You use unsuitable cookware, or
➢ You use cookware which is too small or not centred properly on the cooking
zone.
While using unsuitable cookware, the cooking zone does not heat up. The display
goes off automatically after 1 minute even if you have not placed suitable
cookware on the cooking zone.

3.5 How to stop cooking

1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
2. Switch off the relevant cooking zone by setting the - sensor
to 0. Check that the indicator displays 0 and then H.
3. Switch off the appliance with the O
4. Beware of the hot surfaces of the cooking zones! An H
indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has cooled
down. You can use the residual heat for saving energy
when starting a new cooking procedure on a cooking zone
which is still warm/hot.

3.6 Key lock

❖ You can lock the sensors to protect them from unintentional operation or
operation by children.
NOTICE! When the sensors have been locked, all sensors except
ON/OFF are deactivated. You can switch off the appliance with the
ON/OFF sensor in case of emergency, but you should unlock the sensors
afterwards.
↔
INDICATOR OF THE POWER LEVEL ALTERNATELY
-sensor of the
/O -sensor.
N FF
51
.