Error Code - Pkm Novara In6025R Bedienungsanleitung

C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
➢ Cookware cannot be detected,
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
➢ Technical malfunction.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.

7. Error Code

If an abnormality comes up, the hob will enter the protective state automatically
and display corresponding protective codes.
Problem
E1
E2/E3
E4/E5/E6
E7
E8/E9
depending on model
6
DISPLAYED
positioned on
6 (
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
Possible causes
Signal lost (PCB failure)
Abnormal high/Low
input voltage
Thermistor failure.
Abnormal high
temperature (dry
Failure of IGBT sensor
.
➢ Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
➢ Note the complete error-code,
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at
burning)
74
).
What to do
Please contact after sales
service.
Stop cooking and wait
until input voltage back
to normal. If not please
contact service center.
Please contact service
center to repair.
Cut off power, wait for
30min and switch on.
If still not working,
please contact service.
Please contact service
center to repair.