Switching On; Working - Stihl RE 362 Gebrauchsanleitung

English
200 V / 3~:
up to 10 m 3.5 mm
10 m to 30 m 5.5 mm
Connection to the power supply socket
Before connection to the power supply,
check that the machine is switched off –
see "Switching off the machine"
Swivel the lower holder upward and
N
remove the power cord
Plug the power cord or extension
N
cord into a properly installed outlet
50

Switching On

2
2
NOTICE
The machine may only be switched on
when the water intake hose is connected
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
Turn on water supply
N
Completely unroll the high-pressure
N
hose
Turn the master switch to I – now
N
the machine is in standby mode
Machine with hose reel
NOTICE
Always completely unroll the high-
pressure hose from the hose reel. The
high water pressure causes the high-
pressure hose to expand. This can also
damage the hose reel or high-pressure
hose.

Working

Actuate the spray gun
Direct the spray attachment towards
N
the object to be cleaned
Point the rotary nozzle downwards
N
when starting (if fitted)
1
Press the safety latch (1) in the
N
direction of the arrow – the lever (2)
is unlatched
Squeeze the lever (2)
N
The motor stops when the lever is
released.
Pressure/quantity control on the
machine
Working pressure and water flow rate
can be set on the high-pressure pump
for long-term adjustment in line with the
cleaning job concerned.
RE 362, RE 362 PLUS, RE 462, RE 462 PLUS