Connecting The Pressure Washer To The Power; Supply; Switching The Pressure Washer On And Off; Switching On The Pressure Washer - Stihl RE 90 Gebrauchsanleitung

9 Connecting the pressure washer to the power supply
► Attach spray gun to the high-pressure hose.
► Squeeze and hold down spray gun trigger.
► Switch on pressure washer.
9 Connecting the pressure washer to the
power supply
9.1

Connecting the pressure washer to the power

supply

3
2
3
► Move the rocker switch (1) to the 0 position.
► Remove connecting cord (2) from the holders (3).
► Plug the connecting cord (2) into a correctly installed
socket.
10 Switching the pressure washer on and
off

10.1 Switching on the pressure washer.

When the pressure washer is switched on, voltage
fluctuations may occur under unfavorable mains conditions
with a power line impedance greater than 0.15 Ohm. The
voltage fluctuations may negatively affect other connected
electrical appliances.
0458-814-9821-B
► Set the toggle switch to the I position.
1

10.2 Switching off the pressure washer.

► Set the toggle switch to the 0 position.
English
57