Machine Elements; Explanation Of Symbols; Meaning Of The Symbols In The Operation Manual; Meaning Of The Symbols On The Machine - LORCH Control Pro T-Serie Bedienungshandbuch

1

Machine elements

7
9
10
11
12
18
13
14
Control panel
2
Connecting plug socket (T-series DC) torch/elec-
3
trode holder/component guiding
Connecting plug socket (T-series AC/DC) torch/
3
electrode holder
The full HF ignition voltage is present at the
wires of the torch control socket.
Never connect anything else than the con-
trol plug of the hand torch.
Torch switch socket
4
Gas connection torch
5
Connecting plug socket(T-series DC) component
6
guiding/Electrode holder
Connecting plug socket (T-series AC/DC) compo-
6
nent guiding
Transportation belt
7
2

Explanation of symbols

2.1 Meaning of the symbols in the opera-
tion manual
Danger of physical injury or death!
If the danger warnings are disregarded,
this can cause slight or severe injuries or
even death.
Danger of property damage!
Disregarding danger warnings can cause
damage to workpieces, tools, and equip-
ment.
i i
General note.
Designates useful information about the
product and equipment.
- 32 -
8
3
4
5
6
Handle (hoisting point)
8
Mains cable holder
9
Main switch
10
Mains cable
11
Shielding gas connection
12
LorchNet socket
13
Remote control socket
14
Accessories belt
15
Power supply socket Cooling system
18
The carrying strap is exclusively for the
transport by a person.
Illustrated or described accessories are
i i
partially not included in the scope of deliv-
ery. Subject to change.
2.2

Meaning of the symbols on the machine

Danger!
Read the user information in the operation
manual.
Disconnect the mains plug!
Pull out the mains plug before opening the
housing.
909.2679.9-01
Explanation of symbols
2
15
03.19