General Safety Rules - SCOPREGA TURBO MAX 12 V Bedienungsanleitung

The content in this manual has been carefully prepared and is believed to be accurate, but no responsibility is assumed
for inaccuracies. Scoprega reserves the right to make changes without further notice to any products herein to improve
reliability, function or design. Scoprega does not assume any liability arising out of the application or use of any product
or circuit described herein; neither does it convey any license under its patent rights of others.
WARNINGS:
1. Read these instructions.
2. Keep these instructions.
3. Follow all instructions.
Install in accordance with the manuafacturerʼs instructions.
4.
5. Do not exchange polarized DC Power Supply Terminals.
6. Protect the cord from being walked on or pinched.
7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.
8. Do not disassemble the product. Incorrect reassembly may result in a risk of Short Circuit.
9. Provide adequate ventilation and refrain from placing items on or around the product during operation.
DO NOT SUPPLY THE DC DRIVE WITH WRONG POLARITY – THE PRODUCT CAN BE DAMAGED

GENERAL SAFETY RULES

CONSIDER WORK AREA ENVIRONMENT. Donʼt expose the drive to rain. Donʼt use it in presence of flammable liquids or
1.
gases.
DONʼT ABUSE CORD. Keep cord from heat, oil, and sharp edges.
2.
3. WARNING! RISK OF UNSAFE OPERATION. Do not modify or attempt to repair. Never drill into or make any modifications to
the DRIVE.
INTRODUCTION
SCOPREGA Turbomax 24V-EV is the ultimate electric Inflator that stands alone for reliability and function. The unit has integrated a
digital DC servo- drive developed with DSP and high efficient MOSFET technologies controlled by a microprocessor. It is able to control
a Brush DC motor pair in terms of speed (velocity control) and current independently from input voltage. The Turbomax has two
powerful motors and when the pump starts it will be on a high volume twin pump (turbine) until it reaches the required pressure. Once
reaching the set pressure it will automatically switch off.
Suggested Uses:

Large Inflatable Boats (pumps 7 meter boat in 8 min)

Lazarettes for Super Yachts

Rafts, air mattresses, swimming pool floats, etc.
Characteristics:

Input Voltage:

Input Current:

Control technology:

Capacity

Pressure

Pressure can be regulated with auto shut off

Safety Fuse

Screws, brackets and inflation connectors are standard

Optional tube is supplied on demand

Option water tight box ( EDP 7401158 ) available
FUNCTIONAL INTERFACE (See
Pictures)
TURBOMAX 24V-EV
SAVE THESE INSTRUCTIONS
21-31 VDC
25 A (Cont.), 30 A (Peak),
PWM based on DSP and high smooth servo control algorithm.
1000 L/min
250 mbar (3.6 psi)
(175 to 250 mbar)
25 m roll lengths
Pressure
Regulation Knob
Warning Red LED
PWR ON Green LED
Inlet (deflate) Port
Outlet (inflate) Port
ON/OFF
START
2