Herunterladen Inhalt Inhalt Diese Seite drucken

General Safety Rules; Functional Description - SCOPREGA BRAVO TURBO MAX KIT 12V Bedienungsanleitung

Elektrische auflassvorrichtung 12/24 vdc
Vorschau ausblenden Andere Handbücher für BRAVO TURBO MAX KIT 12V:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
WARNING! Read all instructions before operating the inflator. Failure to follow all instructions listed
below may result in product damage, and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNING:
1.
Read these instructions.
2.
Keep these instructions.
3.
Follow all instructions.
4.
Do not block any ventilation openings. Install in accordance with the manuafacturer's instructions.
5.
Do not exchange polarized DC Power Supply Terminals.
Red is the Positive, Black is the negative one.
6.
Protect the cord from being walked on or pinched.
7.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way.
8.
Do not disassemble the product. Incorrect reassembly may result in a risk of Short Circuit.
9.
Provide adequate ventilation and refrain from placing items on or around the product during operation.
10.
Do not incinerate the battery even if it is severely damaged or is completely worn out.
The battery can explode in a fire. Check with local codes for possible special disposal instructions.
11.
If any leakage of liquid from the battery cells occurs, discontinue use immediately
and return the battery to your local Bravo Service Center or authorized service facility.
12.
Never attempt to open the battery for any reason. If the plastic housing of the battery breaks
or cracks, immediately discontinue use and do not recharge.
13.
Keep this product out of the reach of children.
14.
Since the vibration produced by the inflator may cause it to "walk",
do not operate on a high shelf or other surface.
DO NOT SUPPLY THE INFLATOR AT HIGHER VOLTAGE THAN NOMINAL

GENERAL SAFETY RULES

1.
CONSIDER WORK AREA ENVIRONMENT. Don't expose the inflator to rain.
Don't use it in presence of flammable liquids or gases.
2.
DON'T ABUSE CORD. Never carry inflator by cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
3.
AVOID UNINTENTIONAL STARTING.
Don't start the inflator with the inlet port in contact with dust or water.
4.
STAY ALERT. Watch what you are doing. Use common sense.
5.
CHECK DAMAGED PARTS. Before further use of the inflator, a guard or other part that
is damaged should be carefully checked to determine that it will operate properly
and perform its intended function.
6.
DO NOT OPERATE portable inflators near flammable liquids or in gaseous or explosive
atmospheres. Motors in these inflators normally spark, and sparks might ignite fumes.
7.
WARNING! RISK TO BREATHING. The compressed air from your inflator is not safe for breathing.
Never inhale air from your inflator or from a breathing device connected to the inflator.
8.
WARNING! RISK OF BURSTING. Inflate items only to their manufacturer's recommended values.
Instruction Manual
WARNING: READ THIS MANUAL BEFORE OPERATING THE PRODUCT
Exceeding the pressure rating could cause them to explode resulting in personal injury.
9.
DO NOT LEAVE THE UNIT RUNNING UNATTENDED.
Over-inflation could result in serious injury and property damage.
10.
WARNING! RISK OF UNSAFE OPERATION. Do not modify or attempt to repair.
Never drill into or make any modifications to the inflator or its attachments.
11.
WARNING! RISK OF FIRE. Allow inflator to cool 20 minutes if operated for more than 30 minutes.
12.
Never carry the inflator by the hose.
IMPORTANT CHARGING NOTES
1.
Longest life and best performance can be obtained if the battery is charged when the air
temperature is between 18°- 24°C (65°F and 75°F). DO NOT charge the battery in an
air temperature below +40°F(+4.5°C), or above +105°F (+40.5°C).
This is important and will prevent serious damage to the battery.
2.
The charger and battery may become warm to touch while charging.
This is a normal condition, and does not indicate a problem.
3.
DO NOT immerse charger in water or any other liquid.
WARNING: DO NOT ALLOW ANY LIQUID TO GET INSIDE THE CHARGER. ELECTRIC SHOCK MAY RESULT
4.
DO NOT attempt to charge the battery with any chargers other than the ones in this manual.
The charger and battery are specifically designed to work together.
5.
The charger is not intended for any use other than charging the battery in the Inflator.
Any other uses may result in risk of fire, electric shock or electrocution.
6.
Make sure cord is located so that it will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
7.
Do not operate charger with a damaged cord or plug.
8.
Do not operate the charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way.
9.
Do not disassemble charger. Incorrect reassembly may result in a risk
of electric shock, electrocution or fire.
10.
Never use another charger to charge this product. Always use identical replacement parts only.

FUNCTIONAL DESCRIPTION

1.
Main power switches
2.
Pressure regulation knob
3.
Inlet (deflate) Port
4.
Outlet (inflate) Port
5.
Air hose with adaptors
6.
Safety Fuse
7.
12/24 V DC boat (vehicle) or battery connector
8.
Carry bag / Accessory storage
3
2
1
8
Instruction Manual
WARNING: READ THIS MANUAL BEFORE OPERATING THE PRODUCT
4
6
5
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis