Benning MM 12 Bedienungsanleitung Seite 21

TRUE RMS digital multimeter for
- Direct/ alternating voltage measurement
- Direct/ alternating current measurement
- Resistance measurement
- Diode/ continuity testing
- Capacity measurement
- Frequency measurement
- Temperature measurement
Contents
1. Operating instructions
2. Safety notes
3. Scope of delivery
4. Description of unit
5. Multimeter functions
5.1 General data
5.2 Key functions
5.3 Menu functions
5.4 Data logger function "LOG"
5.5 Memory function "MEM"
5.6 Data transmission to the PC and to the smartphone/tablet
6. Ambient conditions
7. Electrical data
8. Measuring with the BENNING MM 12
9. Maintenance
10. How to use the protective rubber holster
11. Technical data of the measuring accessories
12. Environmental notice
1. Operating instructions
This operating manual is intended for
- skilled electricians and
- trained electronics personnel.
The BENNING MM 12 is designed for measurements in dry surroundings. It must not be used
in electrical circuits with rated voltages higher than 1000 V AC/ DC (For more details, see in
section 6 "Ambient conditions"). The following symbols are used in the operating manual and on
the BENNING MM 12 itself:
Attention! Magnets might affect the correct functioning of cardiac pacemakers
and implanted defibrillators. As a user of such medical devices, keep a sufficient
distance to the magnet.

Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating manual must be
complied with in order to avoid risks.
This symbol on the BENNING MM 12 indicates that the unit is protection insulated

(safety class II).
This symbol on the BENNING MM 12 indicates the fuses which it contains.
This symbol on the BENNING MM 12 means that the BENNING MM 12 complies
with the EU directives.
This symbol appears on the display for a discharged battery.
This symbol indicates the "diode testing" application.
This symbol indicates the „continuity testing" application. The buzzer provides an
audible signal.
This symbol marks the range „capacity testing".
(DC) voltage or current.
(AC) voltage or current.

Earth (voltage to earth).
12/ 2018
Operating manual
BENNING MM 12
BENNING MM 12

21