Installing The Inlet/Outlet Port - Renkforce 2302698 Bedienungsanleitung

9. Installing the inlet/outlet port

You may operate the product without the inlet port. In such case, the water will be drawn in directly through
the filter cage.
When using the inlet port, you can connect a hose to the inlet.
In the following drawings the outlet port is already installed. You need to install the outlet port yourself
before use. The installation of the outlet port is carried out in the same way as the installation of the inlet
port described below.
1. Open the 4 blue brackets. Remove the upper filter cage.
2. Pull out the baffle.
24