D) Attaching The Control Unit To The Pump Unit - Renkforce RF-4604764 Bedienungsanleitung

• The indicator light on the charger stays red until the battery
is fully charged. Once fully charged (approx. 5 hours), the
indicator light turns green.
• Disconnect the charger from the mains socket outlet and
battery when fully charged.

d) Attaching the control unit to the pump unit

When mounting the control unit to the pump unit (11), ensure there is no tension or twisting of the power
cable (21).
• Place the gasket (17) on the outlet (16) of the pump unit, then place the collection pipe (18) flush against the
gasket (Fig. 5).
• Turn the mounting nut (10) in a clockwise direction to secure the collection piper with the pump unit (Fig. 6 & 7).
• To loosen, proceed in the reverse order.
Fig. 5
18
17
16
Ensure the dirt filter (12) is clean and filter cage (13) is fitted securely to the bottom of the pump unit by
turning it in a clockwise direction to lock it in place.
Fig. 6
10
Fig. 4
Fig. 7
vdv
27