6 Connection and commissioning
The GEL 211C is ready; the "Power" LED illuminates green.
Activate WLAN on the mobile terminal.
In the WLAN monitor on the terminal device, select the network using the SSID
(see rating plate).
Establish the connection by entering the password (default password: 12345678).
Wireless network connection
Open the web browser and start the web interface by entering the IP address
192.168.141.1 (default).
If you cannot establish a connection, check the access data using the com-
missioning tool
If the device is not to be operated as a WLAN access point, but is to be inte-
grated into an existing wireless network, or default settings are to be changed
(e.g. WLAN password), the device must be configured accordingly using a PC
(→ page
124).
88
Establishing network connection
(→ page
126).
Lenord+Bauer
GEL 211CS0