NITEHOG PYTHON Bedienungsanleitung Seite 64

TYPICAL FAULTS AND
No.
EXTERNAL SIGNS
The panel buttons do
5
not function
The Auto NUC is not
6
working
The ZOOM is not
7
working
The image on the
8 display is blurred and
out of focus
There are fewer or no
details in the image
9
and there is too much
exposure of the object
The scene background
10
is too dark
11 The image is too dark
64
THEIR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
POSSIBLE CAUSES
Electronics boot failure
Electronics malfunction
External NUC mode is
selected
Shutter is stuck
Electronics boot failure
Electronics malfunction
Device is not focused on
the observed distance
The eyepiece/collimator
back lens are dirty
Opto-mechanical mal-
function
Contrast level is high
Low Contrast level
Low Brightness level
Low Luminance level
Low Brightness level
POSSIBLE
SOLUTIONS
• Restart the device
• Return the device for
maintenance
• Switch to internal NUC
and press N button
• Return the device for
maintenance
• Restart the device
• Return the device for
maintenance
• Focus on the target
object
• Clean the collimator
lens
• Return the device for
maintenance
• Decrease Contrast
level
• Increase Contrast level
• Increase Brightness
level
• Increase display
Luminance level
• Increase Briaghtness
level