NITEHOG PYTHON Bedienungsanleitung Seite 39

Condensation can cause fogging of the external optical surfaces!
Condensation occurs when:
• moving the device from a cold to a warm place or vice
versa;
• The device's temperature differs significantly from the
ambient one;
• Using the device in places with high humidity.
When the temperature of the device is equalized with the
ambient one, the condensation disappears. Use cleaning cloth
to remove moisture. Condensation also can be prevented with
anti-fogging sprays or with sacrificial lenses on the oculars or
with the provided rubber pieces.
Condensation on the objective does not affect the performance
of the device!
Clean the lens surfaces with the Lens Pen®.
EN EN
39