Grundig Hood GDK 4382 B Handbuch Seite 22

MAINTENANCE AND CLEANING
Grease filter
Retains grease particles caused by
cooking procedure.
Grease filter should be cleaned
monthly (or filter filling indicator
system - if available in purchased
model - indicates when it is time)
using acid-free detergent by hand
or in a dishwasher with low tem-
perature and short spin.
When washed in a dishwasher, color
of grease filter may fade slightly,
but this does not affect its filtering
capacity.
Pull spring release lever in order to
remove grease filter. (Figure 16)
16
Cleaning
Particularly do not neglect to clean
your hood immediately after you
have made frying.
Use a soft cloth soaked with liquid
detergent to clean the outer surface
of your hood.
Never use abrasive or scratching
materials for cleaning.
You may use the cleaning agents
commercially available for persis-
tent grease etc. by following the
warnings on the product. In order
not the scratch the brushed steel
body, wipe in the same direction
with the bush trace.
22
Do not use cleaning agents con-
taining hydrochloric acid, bleach or
abrasive powders in order to main-
tain the surface quality of your prod-
uct. Use a cloth dampened in soapy
water or special stainless steel
cleaning spray for stainless steel
steel surfaces. Remove the protec-
tive foil on the appliance.
Caution!
You may cause a fire if you do not
follow the instructions on the clean-
ing and replacement of the filters of
your hood.
If you need to transport the appli-
ance:
Keep the original packaging of the
appliance. Transport the appliance
with its original package, and follow
the transport markings on the origi-
nal package.
If you do not have the original pack-
age:
Do not place any objects on the
7
hood.
Protect the outer surface from im-
7
pacts.
Pack the appliance so that it would
7
not be damaged during transport.
Replacing lamps
WARNING!
Prior to touching the light bulbs, en-
sure they are cooled down.
For replacing lamps, contact Au-
thorized Service.