Hardening Of The Uv-Gel - Silvercrest SNS 45 B4 Bedienungsanleitung

NOTICE
Should any UV Gel i inadvertantly come onto the cuticle or the nail bed,
►
remove it before the hardening, for example, with a cotton wool swab.
Repeat the above process for all nails.
NOTICE
Ensure that the nail is covered evenly with UV Gel i.
►

Hardening of the UV-Gel

NOTICE
► See also the chapter Handling and operation.
Switch on the UV appliance 1 with the ON/OFF switch 2.
Press the start button 4.
Use the time selector button 3 to select the required treatment time. For the
first hardening we recommend the time setting of 240 seconds.
Hold your hand with the nails upward for the duration of the set treatment
time in the opening of the UV appliance 1.
Treat the thumbnail separately because, when you hold your hand in the UV
appliance 1, the UV light only shines on the side of it.
Repeat the application of the UV gel i and the hardening in the UV
appliance 1 as described above.
NOTICE
To improve the stability of the nails, apply several thin coats of UV gel i
►
and harden them each separately.
■ 56 │ GB │ IE
7
t
SNS 45 B4