Cleaning And Care - Silvercrest SMUD 860 A1 Bedienungsanleitung

Cleaning and care

SMUD 860 A1
Downloaded from www.Manualslib.com
2) Press the menu button
programme.
3) The display shows the time left until the programme finishes.
4) Press the timer button
time start flashing.
5) Press the min/- button
to set the hours. You can only set a longer period of time than the set programme
actually requires.
Example
You set the "Stew" programme with a time of 5 hours. It is 11 a.m. The stew
would be finished around 4 p.m. But you don't need the stew until 7 p.m.
In this case, set the time to "08:00". This causes the programme to start later and
finish by 7 p.m.
6) Once you have entered the desired finish time, press the start button
The relevant programme symbol and the set time now light up and the time starts
counting down.
NOTE
If you cannot set the desired time, this might be because the time you have
selected is shorter than the programme duration. In this case, select a longer
time setting or start the programme immediately.
DANGER – RISK OF ELECTRICAL SHOCK!
► Before cleaning the appliance, disconnect the power plug from the mains
power socket! There is a risk of electric shock!
NEVER immerse the base
WARNING! RISK OF INJURY!
► Always allow the appliance to cool down before cleaning it. Otherwise
there is a risk of burns!
manuals search engine
and adjust the desired settings for the
. The respective programme symbol and the set
to set the minutes and the h/+ button
in water or other fluids!
.
GB │ IE │ 29 ■