Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RM4220
4
Setup
If all cables are connected, proceed as follows:
· Connect transducer cable
· Switch on supply voltage
Fig. 2:
Component layout
4.1 Connection method
The transducer connection--method should preferably take place in 6--wire
technique. The factory setting is 4--wire technique.
A1091--21 de/en
33
HBM
- Quicklinks:
- Nullpunkteinstellung
- Technische Daten
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
