Replacement / Individual Parts; Accessories; Customer Specific Opto Edge Pairs - Cedes cegard/Lift LX/LY Installations- Und Bedienungsanleitung

cegard/Lift LX/LY

15.2 Replacement / Individual parts

Part number Specification
100 949 Control unit plug-in
100 937 Opto edge emitter 16 elements
100 936 Opto edge receiver 0.7 ... 4 m, 16
elements
100 951 Opto edge receiver 4 ... 8 m, 16 elements
100 952 Plug-in system controller for one elevator
cabin entrance
100 976 Plug-in system controller for two elevator
cabin entrance
101 250 IR transparent cover for flush mounting kit
101 604 Power contactor completely wired for
latch solenoid with AC / DC supply from
230 / 380 V to 16 A, on DIN rail, snap-on
101 756 Rectifier module completely wired for
latch solenoid with DC supply
180 ... 220 V, 3 A, on DIN rails, snap-on

15.3 Accessories

Part number Specification
100 847 Mounting kit for flush mounting of one
entrance: Includes drilling template, drill,
protective plate, painted yellow and black
and all necessary mounting material (only
for standard opto edges, 16 elements)
100 848 Mounting kit and protective plate for
surface mounting of one entrance:
Includes drilling template, drill, protective
plate made from stainless steel, painted
yellow and black and all necessary
mounting material (only for standard opto
edges, 16 elements)
114 745 Door control relay for the actuation of an
automatic door or for load control display,
one unit required per entrance.
100 849 Alarm transmitter for surface mounting
including 4 m connection cable for
continuous or intermittent tone
104 075 Slot type sensor GLS 126 NT for override
delay, 5 m cable, NC
104 073 Slot type sensor GLS 126 NT for override
delay, 5 m cable, NO
101 291 Drilling template for opto edges (only for
standard opto edges, 16 elements, Part
No. 101 072 und 101 073)
101 716 Stopping module completely wired for
the integration of a stop button. Activation
of the stop button is handled like an
emergency stop, on DIN rails, snap-on
101 243 Information sign for passangers
101 245 Information sign for passangers (reset
button)
26
Order example:
A through-loading elevator with 6 m opening width requires:
- 1 × 101 071 system control rack for 2 elevator entrances
- 2 × 101 073 opto edge pair 4 to 8 m
- 2 × mounting kits of your choice
- 1 × 100 849 alarm transmitter
Other systems and accessories upon request from your
CEDES partner or CEDES subsidiary.

15.4 Customer specific opto edge pairs

Part number Specification
101 471 AXXXX Pair of opto edges 16 elements
Length of opto edges and monitoring
height as desired
101 472 AXXXX Pair of opto edges 24 elements
Length of opto edges and monitoring
height as desired
If required, the opto edges can also be supplied in IP67
rated casing.
English
© CEDES | V 2.8