Digital Lcd Functions - Ducati MH 900 Evoluzione 2001 Anleitung- Und Instandhaltungsheft

Digital LCD functions

Check
When the ignition key is switched ON, the rev counter is
set to zero, all figures on the LCD come on for 2
seconds, all warning lights come on and total distance
covered is displayed.
Odometer/trip meter
Press button 1 with the key in the ON position to toggle
odometer and trip meter indications.
E
Resetting the trip meter
Press button 1 to display trip meter indication. Hold
down button 2 for at least 2 seconds to reset.
Clock set-up
Press button 1 to display odometer indication. Hold
down button 2 for at least 2 seconds.
Set AM/PM pressing button 1.
Press button 2 to enter hour set-up mode; press button
1 repeatedly to change hour indication.
Press button 2 to enter minute set-up mode.
Hold down button 1 to increment minutes. Hold button
down for over 5 seconds and minutes will increase
faster.
Press button 2 to exit set-up mode.
Speed indication in kph or mph:
Factory setting is kph. When you want to change from
kph to mph or vice versa proceed as follows:
Turn the ignition key to OFF.
Hold down buttons 1 and 2 at the same time and turn
the key to ON. If current setting is kph, the wording EU
12
will flash, whereas the wording USA will flash when
current setting is mph.
Press button 1 to toggle the EU and USA indications.
Hold down button 2 for at least 5 seconds to store new
setting.
If you have followed the procedure correctly, the word
OFF will appear.
Switch key back to ON and the selected unit of
measurement will appear.
1
2
fig. 4