Manual Rinsing Cycle; Hot Water Circuit Rinsing; Coffee Brewing Circuit Rinsing; Aquaclean Filter - Saeco HD8914 Bedienungsanleitung

Manual rinsing cycle

HOT WATER
HOT
WATER
AROMA STRENGTH
GROUND COFFEE

AquaClean filter

-
Then the machine ready screen appears with the AquaClean
icon to indicate that the filter has been installed.
Dispense cups
this water. To complete the activation, you have to perform both the hot
water circuit rinsing and coffee brewing circuit rinsing.
During the manual rinsing cycle, fresh water flows through the water and
coffee brewing circuit. This takes a few minutes.

Hot water circuit rinsing

Place a container under the hot water/steam dispensing spout.
Press the HOT WATER button.
-
The machine starts dispensing hot water.
Note: To interrupt the rinsing cycle, press the OK button.
When the machine has dispensed
OK button to stop the hot water dispensing. Repeat steps to

Coffee brewing circuit rinsing

Place a container under the coffee dispensing spout.
Press the AROMA STREN6TH button and select the pre-ground coffee
brewing function.
Note: Do not add pre-ground coffee in the pre-ground coffee
compartment.
Press the ESPRESSO LUN6O button.
-
The machine starts dispensing water from the coffee dispensing
spout.
Wait until the machine stops dispensing water and empty the container.
Repeat steps to
When the machine has returned to the main menu, empty the container.
The machine is ready for use.
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of
user manual, you don't have to descale your machine for
capacity of ml .
Note: Your machine has to be completely limescale-free before you start to
use the AquaClean filter. If you did not activate the filter upon first use and
. l of hot water to complete the activation. Discard
cups of hot water
twice.
Aquaclean filters as indicated in this
English
%
. l , press the
twice.
cups with a