Manual Rinsing Cycle - Saeco Intelia Deluxe HD8902 Installationsanleitung

English
10
ON
A Q U A
CLEAN
OFF
0/8
100%
AQUA
CLEAN

Manual rinsing cycle

18 Select ON on the display and confirm the activation by pressing the OK
button.
The display shows a tick icon to confirm the activation.
19 The display shows the filter ready icon to indicate the AquaClean filter
has been installed correctly.
20 To rinse the filter, press the HOT WATER button and let half a litre of
water flow out from the hot water/steam dispensing spout. Discard this
water.
It can take a while until water comes out of the hot water dispensing
spout. The filter needs to be fully filled and rinsed with water.
The machine is ready for use.
After installing the AquaClean filter, you do not have to perform the manual
rinsing cycle.
1 Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button to select pre-ground coffee. Do not
add pre-ground coffee.
3 Press the ESPRESSO LUNGO button. The machine starts dispensing
water.
4 When the machine stops dispensing, empty the container. Repeat steps
1-3 twice.
5 Place a container under the classic milk frother.