Saeco HD8914 Bedienungsanleitung Seite 23

Clean the top part of the coffee exit duct thoroughly with a spoon
handle. Insert it as indicated in the figure.
Clean the bottom part of the coffee exit duct thoroughly with a spoon
handle or with the multifunctional tool provided with the machine. Insert
it as indicated in the figure.
Remove the coffee residues container, empty it and rinse it under a
lukewarm tap. Let it dry and then reinsert it.
Rinse the brew group thoroughly with lukewarm water. Clean the upper
filter carefully.
Caution: Do not clean the brew group in the dishwasher and do not use
washing-up liquid or a cleaning agent to clean it. This may cause the brew
group to malfunction and may have a negative effect on the coffee taste.
Let the brew group air-dry thoroughly.
Note: Do not dry the brew group with a cloth to prevent fibers from
collecting inside the brew group.
Clean the inside of the machine with a soft damp cloth.
Before you slide the brew group back into the machine, make sure the
two reference signs on the side match. If they do not match, perform the
following step:
English