Saeco HD8914 Bedienungsanleitung Seite 28

English
START
CALC
CLEAN
REMOVE
FILTER
2
1
CALC
CLEAN
Note: Do not remove the brew group during the descaling
procedure. Warning: Do not drink the descaling solution or the
water dispensed during the descaling procedure.
Remove the drip tray and the coffee grounds container, empty and clean
them and put them back into place.
Remove the automatic milk frother from the hot water/steam dispensing
spout.
Place a large container . l under the coffee dispensing spout and
under the hot water dispensing spout.
When the display shows 'START CALC CLEAN', press the OK button to
start the descaling procedure. Remove the hot water dispensing spout if
present.
-
The following icon on the display reminds you to remove the
AquaClean filter.
Note: You can press ESC to skip descaling. If you want to start the
descaling procedure later, press the MENU button, choose select ' Menu'
and scroll to select 'Descaling'. Press OK to confirm.
Pour the descaling solution in the water tank. 5ill the water tank with
fresh water up to the CALC CLEAN level indication. Place the water tank
back in the machine. Press the OK button to confirm.
-
The first phase of the descaling cycle starts. The machine starts
dispensing the descaling solution at intervals.
-
The display shows the descaling icon, the phase indication and the
duration. This first phase takes
Let the machine dispense the descaling solution until the water tank is
empty.
Remove the water tank and rinse it.
5ill the water tank with fresh water up to the CALC CLEAN level
indication. Place the water tank back in the machine and press OK.
Remove and empty the container and place it back under the coffee
dispensing spout. Press OK to confirm.
The second phase of descaling starts, which is a rinsing cycle. This phase
takes minutes. The display shows the rinsing icon and the duration of
the phase.
Note: If the water tank is not filled up to the CALC CLEAN level, the
machine may require another rinsing cycle.
minutes.