Manual Rinsing Cycle; Aquaclean Filter; Aquaclean Filter Installation - Saeco Intelia Deluxe HD8906 Bedienungsanleitung

Manual rinsing cycle

AquaClean filter

AquaClean filter installation

1 Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
Do not add pre-ground coffee in the pre-ground coffee compartment.
3 Press the ESPRESSO or ESPRESSO LUNGO button.
-
The machine starts dispensing hot water.
4 Wait until the machine stops dispensing water and empty the container.
5 Repeat steps 1-3 twice.
6 Press the SPECIAL DRINKS button. Place a container under the hot water
dispensing spout.
7 Press the UP/DOWN buttons to scroll through the options of the display.
Press the OK button to select 'hot water'.
8 Press the OK button to start hot water dispensing.
- Dispense water until the display shows the no water icon.
9 Fill the water tank with fresh water up to the MAX level and remove the
container.
The machine is ready for use.
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of 8 Aquaclean filters as indicated in this
user manual, you don't have to descale your machine for 5000 cups (with a
capacity of 100 ml).
Your machine has to be completely limescale-free before you start to use
the AquaClean filter. If you did not activate the filter upon first use and
brewed more than 50 cups (with 100 ml capacity), you need to descale the
machine before you activate the filter.
1 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.
2 Immerse the AquaClean filter upside down in a jug with cold water and
wait until no more air bubbles come out.
3 Remove the water tank from the machine.
English
11