Manual Rinsing Cycle; Hot Water Circuit Rinsing; Coffee Brewing Circuit Rinsing; Aquaclean Filter - Saeco Incanto HD8919 Bedienungsanleitung

English
ON
OFF
0 / 8

Manual rinsing cycle

MENU
HOT
WATER

AquaClean filter

Select ON on the display and confirm the activation by pressing the OK
button.
-
When activation is finished, the display shows a tick to confirm
activation.
-
Then the machine ready screen appears with the AquaClean
icon to indicate that the filter has been installed.
Dispense cups
this water. To complete the activation you have to perform both the hot
water circuit rinsing and coffee brewing circuit rinsing.
After installing the AquaClean filter, you do not have to perform the manual
rinsing cycle.
During the manual rinsing cycle, fresh water flows through the water and
coffee brewing circuit. This takes a few minutes.

Hot water circuit rinsing

Insert the hot water dispensing spout if it is not installed and place a
container under the hot water dispensing spout.
Press the MENU button. Select the DRINKS function, confirm and scroll
the menu to select the HOT WATER function. Press the OK button to
confirm.
-
The display reminds you to install the hot water dispensing spout,
press the OK button to confirm.
-
The machine starts dispensing hot water.
Note: To interrupt the rinsing cycle, press the OK button.
When the machine has dispensed
button to stop the hot water dispensing. Repeat steps to

Coffee brewing circuit rinsing

Place a cup under the coffee dispensing spout.
Press the ESPRESSO LUN6O button.
Brew - cups of coffee, discard this coffee.
Return to the main menu. The machine is ready for use
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of
user manual, you don't have to descale your machine for
capacity of ml .
Note: Your machine has to be completely limescale-free before you start to
use the AquaClean filter. If you did not activate the filter upon first use and
. l of hot water to complete the activation. Discard
cups of hot water
Aquaclean filters as indicated in this
%
. l press the OK
twice.
cups with a