1
2
Open the lid of the bean hopper. 5ill the bean hopper with coffee beans
and close the lid.
Note: Do not overfill the bean hopper to avoid damage to the grinder.
Caution: Only use espresso beans. Never use ground coffee, unroasted
coffee beans or caramelized coffee beans, as this may cause damage
to the machine.
Insert the mains plug into a wall socket
the socket located on the back of the machine
Set the main switch to the ON position to switch on the machine.
The standby button flashes.
Press the standby button to switch on the machine.
-
The display shows the circuit priming icon to indicate that you have to
prime the circuit.
Remove the automatic milk frother if it is attached .
English
and insert the small plug into
.