Connection­and­preparation; Connecting­the­loudspeakers - Grundig MS240 Benutzerhandbuch

CONNECTION­AND­PREPARATION
Connecting­the­loudspeakers
1
Insert the wires of the loudspeaker cable into
the terminals »RIGHT+/–« and »LEFT+/–«.
– Connect the cables marked in red to the red
terminals.
Connecting­to­the­mains­supply
Notes:
Check that the mains voltage on the type
7
plate (on the back of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
Before connecting the AC power cord to the
7
wall socket, ensure that all other connec-
tions have been made.
1 Plug the power cord into the wall socket.
Caution:
The hi-fi system is connected to the mains
7
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
20­
ENGLISH
Putting­ batteries­ in­ the­ remote­
control
1
1
Open the battery compartment by pressing
down on the catch and then remove the lid.
2
Observe the polarity marked on the base of
the battery compartment when inserting the
batteries (micro batteries, 2 x 1.5 V, R 03 /
UM 4/AAA).
3 Close the lid of the battery compartment.
Notes:
Do not expose the batteries to extreme heat,
7
caused for example by direct sunlight, heat-
ers or fire.
Remove the batteries when they are flat or
7
when you know that the hi-fi system will not
be used for a long period of time. The man-
ufacturer accepts no liability for damage
caused by leaking batteries.
Environmental­note:
Batteries, including those which do not con-
7
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
­---------------------------------------
2
3