Inhaltsverzeichnis
Werbung
Allgemeiner Teil / General Section
OVERVIEW
SOURCE
TUNER
CD
TAPE
SOUND
SELECT ROOM
TONE CONTROL
SOUND MODE
BACK
CONTROL
SELECT ROOM
SPEAKERS
SLEEP
CONNECTION AND PREPARATION
Connecting and installing the loudspeakers
HORIZONTAL
1 - 14
__________________________________________________________________________________
The main remote control menus
The »
« menu:
SOURCE
»
«
= Tuner mode
TUNER
»
«
= CD mode
CD
»
«
= External tape deck operation
TAPE
»
AUX
«
= Operation with an external device such as a television.
The »
SOUND
« menu:
»
«
= Selects a particular pair of loudspeakers (if
SELECT ROOM
several pairs are used)
»
«
= Adjusts the bass, treble and balance levels
TONE CONTROL
»
«
= Selects sound settings
SOUND MODE
»
«
= Activates and deactivates the Loudness func-
LOUDNES
tion
»
EDIT USER PRESET
« = Programs custom sound settings
The »
CONTROL
« menu:
»
«
= Selects a particular pair of loudspeakers
SELECT ROOM
(if several pairs are used)
»
«
= Switches loudspeakers on and off
SPEAKERS
»
«
= Selects the Timer function
SLEEP
»
«
= Selects the communication channel
AUDIO CHANNEL
»
«
= Installs loudspeakers and remote controls.
INSTALL
These menus are explained in detail in this manual with the aid of a number of
examples.
The HiFi transmits audio signals by radio to the loudspeakers. Speaker cables
are not necessary.
You can operate up to six pairs of loudspeakers with the HiFi system.
The maximum transmission range from the HiFi to the loudspeakers is 15 m.
Walls and ceilings reduce the range, especially if they are made of reinforced
concrete.
Connecting the loudspeakers to the mains supply
1
Plug the mains cable into the socket.
Installing the first pair of loudspeakers
1
Press
»POWER
« to switch on the left loudspeaker of the first pair, then
switch on the right loudspeaker of the first pair.
– The indicators in the
»POWER
« buttons flash green and orange, which
means that the loudspeakers are ready for installation.
Note:
If the indicators do not flash, press the »RESET« button on the bottom of the
loudspeaker case with an implement such as a paper clip.
2
Switch both loudspeakers off again.
3
Switch on the HiFi by pressing the
»O
HORIZONTAL
– The HiFi display reads: »
Note:
HORIZONTAL
If »
« does not appear on the HiFi display, press
MODE« on the HiFi and hold it down until the word »
appears.
_______________________________________
I« switch.
«.
»SOUND
HORIZONTAL
«
RCD 2000
GRUNDIG Service
Werbung
Inhaltsverzeichnis
