Cassette­mode; Aux­mode - Grundig MS240 Benutzerhandbuch

CASSETTE­MODE­
Selecting­the­cassette­input­
source
1
Select the cassette input source with »SOURCE«
on the hi-fi system or »CASS« on the remote con-
trol.
Playback
1
Open the front flap which is marked with
»OPEN« on the front panel.
2 Press » « to open the tape compartment.
7
3 Insert a cassette in the compartment with the
open side facing downwards and the full reel
on the left side and close the compartment.
4
Press » « to start playback.
8
– The button is automatically released at the
end of the tape, except if pause function has
been activated.
5 To pause playback press »II« and resume
playback by pressing »II« again.
6 End playback with »
Note:
The source cannot be changed while play-
7
ing or recording a cassette.
AUX­MODE
Listening­to­an­external­source
You can listen to the sound of the connected ex-
ternal device (e.g. a MP3 player) through your
system's speakers.
1 Select the AUX source with »SOURCE« on the
hi-fi system or » AUX« on the remote control.
2
Use a standard audio adapter (not supplied)
to connect »AUX­In« socket (ø 3.5 mm ) on
the back of the hi-fi system to an »AUDIO
OUT« or » U « headphone socket on an exter-
nal equipment (such MP3 player).
­-----------------------------------------------------------------------------------------------------------
«.
7
­--------------------------------------------------------------------------------------------------------------------------------
Fast­forward­and­reverse­search
1
In stop mode, press »
– » « rewinds to the beginning, »
3
fast forwards to the end.
Recording­onto­cassette
Erase­protection
Each new recording writes over the previous re-
cording.
You can protect your recordings against inad-
vertent deletion by breaking the protection tab in
the opening in the spine of the tape.
Purchased recordings on music tapes are al-
ready protected against accidental deletion.
If you wish to record on a protected tape, seal
the opening with adhesive tape.
Notes:
Only use NORMAL-type cassettes (IEC I) for
7
recording. CHROME (IEC II) or METAL (IEC
IV) tapes are not suitable.
The Ultra Bass System does not affect re-
7
cording.
« or » «.
3 4
4
25­
ENGLISH
«