Herunterladen Inhalt Inhalt Diese Seite drucken

Connection­and­preparation - Grundig M 2050 BT DAB+ Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für M 2050 BT DAB+:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

CONNECTION­AND­PREPARATION
Connecting­the­loudspeakers
1
Insert the wires of the loudspeaker cable into
the »SPEAKER­OUTPUT­(4­�)­R­­L« fasteners
on the hi-fi system.
Notes:
Observe the left and right channels (L = left
7
channel, R = right channel).
Connect each of the red sockets (+) on the
7
hi-fi to the red sockets (+) on the loudspeak-
ers.
Connecting­the­antenna
1­Plug the roof antenna cable into the antenna
socket
»DAB/FM­
system.
Note:
If no roof antenna is available, use the
7
auxiliary antenna supplied. When suitably
positioned and with adequate signal, this
antenna provides adequate reception of
FM and DAB channels. Do not shorten the
auxiliary antenna.
Connecting­ an­ MP3­ player­ or­ a­
USB­memory­stick
Caution:
The hi-fi system must be switched off while
7
the USB connection is being made. If it is not
switched off, data can be lost.
1
Connect the USB interface of the MP3 player
to the »
« socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface »
tem.
26­
ENGLISH
ANTENNA« on the hi-fi
« of the hi-fi sys-
Connecting­external­devices
Note:
Switch the hi-fi system off before you connect
7
external devices.
1
Use standard audio cables to connect the
audio outputs of the external device to the
»AUX­IN« sockets on the hi-fi system.
Connecting­the­headphones
1
Insert the headphone plug (3.5 mm) into the
»
U
« socket on the hi-fi system.
Note:
The loudspeakers of the hi-fi system are
7
switched off.
Caution:
Excessive volume levels when using head-
7
phones or earphones can damage your
hearing.
Connecting­the­power­cord
Notes:
Check that the mains voltage on the type
7
plate (on the bottom of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
All the other devices/loudspeakers must be
7
connected before you connect the power
cord.
1­Insert the power cord into the
on the hi-fi system.
2
Plug the power cord into the wall socket.
Caution:
The hi-fi system is connected to the mains
7
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
­---------------------------------------
»AC­ ~
« socket

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis