Installation Steps; Package Contents - Axis Q1602-E Installationsanleitung

AXIS Q1602-E/AXIS Q1604-E Installation Guide
Network Camera Installation Guide
This installation guide provides instructions for installing the AXIS Q1602-E/AXIS Q1604-E on your
network. For all other aspects of using the product, please see the User's Manual, available on the
CD included in this package, or from www.axis.com

Installation steps

1. Check the package contents against the list below.
2. Install the hardware. See page 8.
3. Assign an IP address. See page 12.
4. Set the password. See page 15.
5. Adjust zoom and focus. See page 17.

Package contents

Item
Network camera
Wall bracket
Tools
Network cable
CD
Printed Materials
Optional accessories
Downloaded from www.Manualslib.com
AXIS Q1602-E/AXIS Q1604-E
Models/variants/notes
AXIS Q1602-E/AXIS Q1604-E
Wall bracket
Torcs T20 screwdriver
Allen key
Outdoor network cable 5 m (16 ft.) with gasket
M20 Cable gland (for IP66)
AXIS Network Video Product CD, including product documentation, installation
tools and other software
AXIS Q1602-E/AXIS Q1604-E Installation Guide (this document)
Axis Warranty Document
Extra serial number label (2x)
AVHS Authentication key
See www.axis.com for information on available accessories
manuals search engine
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5