Axis Q1602-E Installationsanleitung Seite 14

Page 14
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. When the network camera appears in the window, right-click
the link and select Live View Home Page.
3. See page 15 for instructions on how to set the password.
Assign an IP address in a single device
1. Select the network camera in AXIS Camera Management and click
the Assign IP button
2. Select Assign the following IP address and enter the IP address, the
subnet mask and default router the device will use.
3. Click OK.
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning
IP addresses to multiple devices, by suggesting IP addresses
from a specified range.
1. Select the devices you wish to configure (different models
can be selected) and click the Assign IP
button
2. Select Assign the following IP address range and enter the
range of IP addresses, the subnet mask and default router
the devices will use.
3. Click Update. Suggested IP addresses are listed under New
IP Addresses and can be edited by selecting a device and clicking Edit.
4. Click OK.
Downloaded from www.Manualslib.com
.
.
manuals search engine
AXIS Q1602-E/AXIS Q1604-E Installation Guide