Installation Steps; Package Contents - Axis P1355-E Installationsanleitung

AXIS P1355-E/P1357-E Installation Guide
This installation guide provides instructions for installing an AXIS P1355-E/P1357-E Network
Camera on your network. For all other aspects of using the product, see the User Manual, available
at www.axis.com

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 6
3. Install the hardware. See page 8.
4. Access the video stream. See page 12.
5. Adjust zoom and focus. See page 12

Package contents

Item
Network camera
Power block connector
Terminal block connector
Wall bracket
Tools
CD
Printed Materials
Optional accessories
Downloaded from www.Manualslib.com
AXIS P1355-E, AXIS P1357-E
Installation Guide
Models/variants/notes
AXIS P1355-E/AXIS P1357-E
2-pin connector block to provide power to the camera from a DC power source
(only for indoor variant)
4-pin connector block for connecting external devices to the I/O terminal
connector
2x terminal connector 2-pin STR 2.5mm BP AB
Wall bracket with internal cable channel
Torx T20 screwdriver
Allen key
Installation and Management Software CD
AXIS P1355-E/P1357-E Installation Guide (this document)
Drill template
Extra serial number label (2x)
AVHS Authentication key
See www.axis.com for information on power accessories and outdoor housings
manuals search engine
Page 5