Axis Q1602-E Installationsanleitung Seite 22

Page 22
Note:
The I/O connector on the network camera is connected to the housing at delivery and will
trigger an input port event to indicate a fan or heater error when activated. Please refer to
the User's Manual, available on the CD provided with this product, or from www.axis.com,
for information on how to set up an event.
Function
GND
3.3 V DC
Power
Digital
Input
Digital
Output
Note:
See the User's Manual for more information.
LED indicators on camera
LED
Network
Status
Power
Downloaded from www.Manualslib.com
Pin Notes
1 Ground
2 Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3 Connect to GND to activate, or leave floating
(unconnected) to deactivate.
Note: Connected to housing at delivery.
4 Internal connection to ground when activated,
floating (unconnected) when deactivated. If used
with an inductive load, eg. a relay, a diode must
be connected in parallel with the load, for pro-
tection against voltage transients.
Color Indication
Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No network connection.
Green Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Amber Steady during startup, during reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
manuals search engine
AXIS Q1602-E/AXIS Q1604-E Installation Guide
Specifications
Max load = 50 mA
0 to +40 V DC
Max. load =100 mA
Max. voltage = + 40 V DC