Adding Dishes - hanseatic HG4585E97636W Gebrauchsanleitung

1. Press the button (13) in order to inter-
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. If required, add extra dishwasher
detergent.
3. Press and hold the P button (12) until all
the LEDs to the right of the programme
symbols are no longer illuminated.
4. Select the new programme and any addi-
tional options as described at the start of
the chapter.
5. Press the button (13).
The newly selected dishwashing pro-
gramme will start.

Adding dishes

CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from
■
the door and do not hold your head
or upper body directly above the
open door.
Keep children and pets away from the
■
appliance when opening the door.
Make sure that children do not open
■
the door during operation.
You can add more dishes even if the dish-
washing programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
1. Press the button (13) in order to inter-
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. Open the dishwasher door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
Dishwasher operation
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
6. Press the button (13) again to continue
the dishwashing programme.
A signal tone will sound at regular
intervals while the dishwashing pro-
gramme is paused.
Page EN-25